Product Description
Feature |
- 18650 battery holder with PCB module designed for making 3.7V Li-Ion 18650 battery pack in 1 series 4 Parallel configuration with 5.0A rate limited by PCB installed
- Battery pack watt-hour = 3.7V x cell capacity
- Each holder is design to hold 4 x standard (Flat top) 18650 cell (Do NOT use button top cell)!
|
Protection |
- PCB (5.0A limited, Manufacture part# PCM-L01P04-377) installed on front surface for protect the battery from
- Overcharge (>4.2V)
- Over discharge ( <2.5 V)
- Over drain ( >5.0 Amp)
- Short circuits
|
Terminal |
- 2.6" long 20AWG for charge/discharge terminal
|
|
|
Material |
|
Color |
|
Dimension (LxWxH) |
- 84mm(3.3") x 80mm(3.14") x 18.6mm(0.7")
|
Weight |
|
Temperature |
- Storage temperature: 25'C (77F, Room Temperature)
- Max Operate temperature: 80'C (176F)
|
|
|
Warning |
- This battery holder is designed for standard 18650 (flat top) battery only!
- Please don't remove PCB installed on battery holder.
- This battery holder is for only 1S4P battery pack. Please don't combine battery holder for any series / parallel connection.
- After insert battery(ies), must connect to charger to enable the pcb. Otherwise, you will get "no" output from pcb!
- Li-Ion battery may be exploded if misuse. We are not responsible for any damages or losses caused by misusing
- Always charge battery with attention. Battery pack shall be placed on a fire-proof place to avoid any accident
- Please check battery polarity before plug battery into device. Never make wrong polarity connection.
|
Price Terms︰
FOB SHENZHEN
Payment Terms︰
TT IN ADVANCE
Packing︰
EXPORT WOODEN BOX
Lead Time︰
7 DAYS AFTER RECEIVE PAYMENT
Product Image