Now this tester have the fellow function for voltage less than
10V recharge battery.
1. Static Test
1) Voltage test (For the Li-ion battery in protection status, this function can be
automatically woken up.)
2) Impedance test
3) Charge test
4) Discharge test
5) Over-current test (for Li-ion battery only)
6) Short-circuit protection function test (for Li-ion battery only)
7) Identification resistor 1 (or thermal resistor) test
8) Identification resistor 2 (or thermal resistor) test
9) Setting upper and lower thresholds for the above parameters whose values can be
measured, for the purpose of fast-screening.
10) Communication code test for the batteries with communication IDs
(Currently, this function is only available for DS2502.)
2. Capacity Test
3. Battery Charge
4. Battery Discharge
5. Program DC Power
6. Program E-load
7. VOL and IMP
8. Enter Calibration
9. Read ID (Currently, this function is available for DS2502 only and applicable to the
batteries used in MOTO mobile phones.)
