Feature:
1. Application: Power bank 18650 cell series and Parallel connection,several connection,realize continuous automatic spot welding.
2. Control device: 7.5 inch touch screen, 4 axis PLC programmer, 750W servo and stepper motor.
3. Nickel tabs adopts roll nickel belt, reduce waste.
4. Simple adjust, easy to understand, set 3 parameter to change model.
5. Adopt the hopper material, namely the whole box of cell material,convenient and high efficiency.
6. Fault alarm, according to the prompt removal of fault.
7. Two spot welder for the positive and the negative cell at same time, save cost.
8. Freely set the nickel tabs length.
9. Special spot welder machine.
Technical Parameter
|
Fit
|
Cylindrical lithium battery
|
Input power
|
AC 220-240V/50HZ 3KW
|
|
Application
|
Power bank 18650 cell series and Parallel connection,several connection,realize continuous automatic spot welding
|
Pressure
|
0.4-0.8Mpa
|
|
Main spot welder machine
|
Two spot welder machine BSW-18
|
Feeding mode
|
Adopt hopper feed
|
|
Production efficiency
|
1 cell 1000-1050pcs/hour 5 cell Parallel，340-360pcs/hour
2 cell Parallel，680-720pcs/hour 6 cell Parallel，300-320pcs/hour
3 cell Parallel，600-650pcs/hour 7 cell Parallel，240-270pcs/hour
4 cell Parallel，400-450pcs/hour 8 cell Parallel，220-240pcs/hour
|
Warning
· Avoid touching weld spots immediately after the weld has been performed as they will be hot.
· Always wear safety glasses when working with spot welders and weld heads.
· Be careful not to pinch fingers in moving weld head parts or between welding electrodes.
· Remove hand jewelry before welding.
